How to Update Network Adapter Drivers

The network adapter is a card or built-in port on your computer’s motherboard that allows you to connect your computer to a network with a network cable. Like other hardware devices in your computer, the network adapter may require you to install updated drivers for better performance. You can download these drivers from the network adapter’s manufacturer website. Depending on the format of the driver, you may be able to automatically install the update or you may need to update through your computer’s device manager.

Step 1
Click the “Start” button from your computer’s desktop.

Step 2
Right-click “Computer” and choose “Properties” from the menu.

Step 3
Open the “Hardware” tab if you are using Windows XP and click “Device Manager.” Windows Vista and 7 users can click “Device Manager” from the menu in the left panel.

Step 4
Click on the arrow next to “Network Adapters.” Your device information, such as model number and make, will appear below the entry. You will need this information to download the proper drivers.

Step 5
Go to your network adapter’s manufacturer website and download the drivers for your device. You can usually find driver downloads under the support or driver section. Use the information you recorded from the Device Manager to download the correct drivers.

Step 6
Locate the driver file you downloaded to your computer. If the file is an “.exe” program, double-click the file to launch an installation wizard. If the drivers downloaded as a nonexecutable file, install the drivers using the Device Manager.

Read more : lan manager







Comments

Post a Comment

Popular posts from this blog

Implementing Core Cisco ASA Security (SASAC)

  ASA uses a security level associated with each interface. It is a number between 0 to 100 that defines the trustworthiness of the network that the interface is connected to; the bigger the number, the more trust you have in the network. For example, the most secure network, such as the inside LAN, should have the security level of 100. The outside network connected to an untrusted network (such as the Internet) should have the level of 0. The interface connected to the DMZ should have the security level set to somewhere between 1 and 99 (usually 50). Security levels are used to define how traffic initiated from one interface is allowed to return from another interface. By default, the higher level security interfaces can initiate traffic to a lower level. The stateful inspection determines whether the reply traffic is allowed to make it back through. The following picture illustrates the concept: level 100 for the inside network level 50 for the DMZ network level 0 for the outside ne
Read more

Netware Makes a Splash

During this period, several operating systems were developed, like IBM's MVS operating system, which still dealt with SNA. However, the development of another operating system, dubbed UNIX, really paved the way for NOS everywhere. After a project to develop a large and complex system called Multics failed to get off the ground at Bell Labs in 1969, a group of Bell researchers, led by Ken Thompson and Dennis Ritchie, started work on a less ambitious but no less powerful computing system. After a rocky first few years, Ritchie developed the C programming language, which allowed UNIX to become the first "portable" operating system, meaning it could be implemented on any computer system. The relative simplicity of the system's design and the availability of its source code turned UNIX into a darling of the academic world and a fixture on many university computer networks. Many versions of UNIX were developed, but the Berkeley Software Distribution (BSD) version, develo
Read more

How CrackStation Works

CrackStation uses massive pre-computed lookup tables to crack password hashes. These tables store a mapping between the hash of a password, and the correct password for that hash. The hash values are indexed so that it is possible to quickly search the database for a given hash. If the hash is present in the database, the password can be recovered in a fraction of a second. This only works for "unsalted" hashes. For information on password hashing systems that are not vulnerable to pre-computed lookup tables, see our hashing security page. Crackstation's lookup tables were created by extracting every word from the Wikipedia databases and adding with every password list we could find. We also applied intelligent word mangling (brute force hybrid) to our wordlists to make them much more effective. For MD5 and SHA1 hashes, we have a 190GB, 15-billion-entry lookup table, and for other hashes, we have a 19GB 1.5-billion-entry lookup table. Read more :  lm hash generator
Read more